OXVA
OXVA Xlim ABT Replacement Pods XL - Pack of 3
OXVA Xlim ABT Replacement Pods XL - Pack of 3
Couldn't load pickup availability
OXVA Xlim ABT Cartridge
OXVA Xlim ABT pods are the refillable cartridges made for the OXVA Xlim Pro 4. Their full name is the XLIM ABT Cartridge UNITECH 3.0. Each pack holds three top fill pods in one resistance, and you can pick 0.4, 0.6, 0.8 or 1.2 ohm.
Every Xlim kit and pod is made by OXVA, and our OXVA vapes page has the full range we sell.
ABT stands for Anti-Burn Tech. In the Xlim Pro 4, an ABT pod lets the kit read the e-liquid level inside the pod and stop firing before the coil goes dry, with a refill alert on the screen. In any other Xlim kit the pod works as a normal Xlim pod, just without ABT.
They work with nic salt and freebase e-liquid, and they sit with the rest of the OXVA Xlimrange.

Xlim ABT Pods Features
- ABT liquid-level detection when used in an ABT kit such as the Xlim Pro 4
- UNITECH 3.0 coil, ready 30 seconds after filling
- Upgraded anti-leak design
- Top fill design
- 0.4, 0.6, 0.8 and 1.2 ohm, three pods per pack
- Resistance and wattage printed on the base of every pod
- Fits every current Xlim kit
- Nic salt and freebase e-liquid
How to Tell an ABT Pod From a Standard Xlim Pod
An ABT pod has four contact points on the base, an ABT mark underneath and a red silicone ring at the mouthpiece. A standard Xlim top fill pod has no ABT mark or red ring. Both show the resistance and the wattage range on the base, so you can see at a glance which pod you have.

What Pods Are Compatible With the Oxva Xlim?
The ABT pod fits every current Xlim kit, the same as the standard top fill pod. What changes is whether ABT switches on:
| Kit and pod | What happens |
| Xlim Pro 4 with an ABT pod | Works with ABT anti-burn protection |
| Another Xlim kit with an ABT pod | Works normally, ABT not active |
| Xlim Pro 4 with a standard Xlim pod | Works normally, ABT not active |

If you only need standard pods for an older Xlim, our Xlim V3 replacement pods are the top fill version without ABT.
Are All Oxva Xlim Pods the Same
Not quite. The ABT pod and the standard top fill pod both fit every current Xlim kit, but only the ABT pod has the four contact points and ABT mark that let an ABT kit read the e-liquid level. The Xlim SS pod is different again, made only for the Xlim Pro 2 DNA.
Is 0.8 or 0.6 Better for the Oxva Xlim?
Pick the 0.8 ohm for a tight mouth to lung (MTL) draw at 12 to 16W. Pick the 0.6 ohm for a looser restricted direct lung (RDL) or MTL draw at 20 to 25W. This is the wattage chart for the ABT pod:
| Pod | Wattage | Draw |
| 0.4 ohm | 26 to 30W | RDL |
| 0.6 ohm | 20 to 25W | RDL or MTL |
| 0.8 ohm | 12 to 16W | MTL |
| 1.2 ohm | 10 to 12W | MTL |

Every resistance works with both nic salts and freebase e-liquid.
Our guide to 0.8 vs 0.6 Xlim pods goes through the difference in more detail.
How Long Do Xlim Pods Last?
An Xlim ABT pod typically lasts 2 to 3 weeks, depending on how much you vape, your e-liquid and your wattage. Replace it when the flavour turns weak, sour or slightly burnt, even with e-liquid still in the pod.
In the Xlim Pro 4, ABT stops the kit firing before an empty pod can burn the coil, which means less pod waste.

How to Fill an Xlim ABT Pod
To fill an Xlim ABT pod, top it up through the fill port, close it, then wait 30 seconds before the first puff:
- Fill the pod through its top fill port with nic salt or freebase e-liquid.
- Close the fill port.
- Push the pod into your Xlim kit.
- Wait 30 seconds so the UNITECH 3.0 coil soaks through.
- If your kit has adjustable wattage, set it to the range printed on the base of the pod, then vape.

Xlim ABT Pod Specifications
| Coil | UNITECH 3.0, built in |
| Resistances | 0.4, 0.6, 0.8 and 1.2 ohm |
| Capacity | 3ml standard, 2ml TPD |
| Refill | Top fill |
| E-liquid | Nic salt and freebase |
| Anti-burn | ABT, when fitted in an ABT kit |
| Fits | Every current Xlim kit |
| Pack | 3 pods |
What's in the Box
- 3 x OXVA XLIM ABT Cartridge UNITECH 3.0, in the resistance you choose
Share
